100TDO215-2 Double inner double row bearings TDI

d:15 mm; Coefficient of friction µ max.:0.1; Tolerance shaft:h8; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; D:20 mm; B:10 mm; Mass bushing:0.009 kg;

d:600 mm; B1:31 mm; r3,4 min.:6 mm; B2:55 mm; Mass angle ring:27.5 kg; d1 ≈:695 mm;

Fillet Radius ra:2.50 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:170000 N; Grease Speed Rating n1:3200 rpm; D:200.0000 mm; B:48.00 mm; d:80.000 mm; Basic Dynamic Radial Load Rating C:190000 N; Oil Speed Rating n2:4100 rpm;

J min.:295.275 mm; J max.:333.375 mm; P90°:81.4 kN; P120°:50.7 kN; Cap bolt, SAE grade:5; P150°:46.3 kN; Stabilizing ring:2 x 38151-24; Bearing:23024 CCK/W33; h:39.688 mm; N1:25.4 mm;

G:Tr 900x7; G2:G 1/8; Mass adapter sleeve assembly:373 kg; d3:1030 mm; d:900 mm; d1:850 mm; B5:125 mm; Lock nut:HME 30/900; G3:13 mm; Locking device:MS 30/900-850;

Accessories:One Shield; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; D:140.0000 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Static Radial Load Rating Co:30500 N; Sealed Speed Rating n3:2600 rpm; d:110.000 mm; B:16.00 mm; Basic Dynamic Radial Load Rating C:28100

db min.:343 mm; Limiting speed:1500 r/min; rb max.:3 mm; da max.:334 mm; ra max.:3 mm; B:180 mm; Da max.:444 mm; D1 ≈:407 mm; da min.:316 mm; F:339 mm;

A1:203.2 mm; H:422.275 mm; Cap bolt recommended tightening torque:271.2 N·m; h:69.85 mm; P180°:145 kN; Pa:60.9 kN; Cap bolt:4 x 7/8-9 UNC; A2:285.75 mm; Housing:SAF 634; P60°:364 kN;

d:60.000 mm; Accessories:Two Shields; D:110.0000 mm; Basic Dynamic Radial Load Rating C:78100 N; Oil Speed Rating n2:5000 rpm; B:36.50 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3800 rpm; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:88000 N;

d2 max.:65 mm; Mass rod end:0.53 kg; l7 min.:30 mm; Basic dynamic load rating C:48 kN; l2 max.:128 mm; α:7 °; d:25 mm; Specific dynamic load factor K:100 N/mm²; h:94 mm; l1 min.:53 mm;

G:Tr 360x5; G2:G 1/4; Nut for removal:HM 3172; B1:225 mm; B2:234 mm; G1:33 mm; d:340 mm; Mass withdrawal sleeve:28.5 kg; Hydraulic nut:HMV 72 E; A:9 mm;

ba:57.944 mm; J max.:406.4 mm; H:292.1 mm; A2:203.2 mm; h:60.325 mm; Pa:24.9 kN; P180°:151 kN; Cap bolt recommended tightening torque:515.2 N·m; R2:36.513 mm; Mass pillow block:83.9 kg;

Fw:18 mm; Basic dynamic load rating C:22 kN; Limiting speed:24000 r/min; Reference speed:20000 r/min; Ew:25 mm; Mass needle roller and cage assembly:0.023 kg; U:22 mm; Basic static load rating C0:29 kN; Fatigue load limit Pu:3.55 kN;

Basic Interchange:-; Basic Interchange MCGILL:BB849; Basic Radial Load Rating-Dynamic DC:7600 lbf; Basic Interchange NSK:X421; Basic Interchange BCA:MG305DD; Basic Radial Load Rating-Static SCO:27400 lbf; Basic Interchange SPLIT:-; Accessories:Mast Guide Type- 305; Basic Interchange NDH:ZMG605ATY1Z8

Da:100 max; da:60 min; a:73 mm; B:44.4 mm; Weight:1.9 kg; rs (min):2 mm; D:110 mm; Dynamic (Cr):99.898 kN; Pu:4.373 kN; Bearing designation:3310 C3  ;